|
|||||||||||
LEAD LINED SHEETROCK
New Shield's Lead Lined Sheetrock is used for shielding existing and newly constructed walls with lead where x-ray or sound protection is required
|
|||||||||||
AVAILABLE OPTIONS
|
|||||||||||
Lead is 99.9% pure, meeting Federal Specification QQ-L-201 Grade C |
|||||||||||
|
|||||||||||
LEAD LINED PLYWOOD |
|||||||||||
New Shield also offers Lead Lined Plywood paneling for lead lining walls, ceiling and floors. Like New Shield's Lead Lined Sheetrock, Lead Lined Plywood is mastic bonded under heavy pressure to a single piece of lead and comes complete with one Butt Seam Strip and 25 Lead Buttons |
|||||||||||
|
|||||||||||
|
|||||||||||
All openings penetrating the protective barrier, such as electrical outlets, ductwork, piping, etc., require shielding. This is obtained by a lead barrier behind these openings of sufficient coverage and thickness to prevent penetration of radiation. |
|||||||||||
In all uses of laminated panels, it is important that the panels be butted as closely as possible. |
|||||||||||
Lead liner for electrical coverplate. (cover plate not supplied) |
|||||||||||
Used to provide shielding behind an electrical box that protrudes through the lead lined sheetrock. |
|||||||||||
Used to indicate what walls are shielded with what thickness lead.Measures 3" x 5" with up to six lines of text. |
|||||||||||
In order to prevent radiation leakages, Butt and Corner Seam Strips are used to create overlap. |
|||||||||||
Nails, bolts, screws or other fasteners used to secure the lead panels must be covered with Lead Buttons of the thickness equal to the lead sheet.
This is to eliminate the possibility of radiation leakage at the fastening point. |
|||||||||||
|
|||||||||||
PRE-FINISHED V-GROOVE WOOD PANELS |
|||||||||||
New Shield offers a wide variety of custom finishes for its Pre-Finished V-Groove Wood panels. Choose from a complete line of natural wood finished to match your office's decor. Like New Shield's Lead Lined Sheetrock and Plywood, each panel is mastic bonded to an unpierced lead sheet. Each panel comes with 1 Butt Seam Strip |
|||||||||||
Standard Panel size is 4' x 8' with 4' x 7' lead, however other lead heights are also available |
AVAILABLE OPTIONS |
||||||||||
FINISHING TRIM - Comes in 8' lengths and is not lead lined |
|||||||||||
Base Trim Door Trim Cap |
Inside Corner Outside Corner |
||||||||||
Call our Shielding Hotline (toll free):
1-86 NEW SHIELD (1-866-397-4435) Fax: 1-253-484-5173 EMAIL: info@newshield.net
please remember to include ALL of your company and contact information including phone and fax numbers when sending an email to us |
|||||||||||